our here: Home / Network / Hardware Specific / Asus / RT-N10U

Asus RT-N10U
Asus RT-N10U


Asus RT-N10U,RTN10U_Black


asus routers list,wikidevi,wikidevi






shibby mod,advanced tomato

NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer with only lan cable and power.



Serial Num. = ?
CPU Type = BCM5357
MIPS Rev = ?
CPU Speed = 300 MHz
Bus = ?
Flash Type = ?
Flash Chip = Winbond model: W25Q64BVSIG
Flash Size = 8MB
Max Firmware Size = 8MiB
RAM Size = 32MB
RAM Chip = ?
nvram Size = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100-WAN 4-10/100-LAN
Wired Standard = IEEE 802.3, IEEE 802.3u
boot_wait = 5
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = ?
MiniPCI slots = ?
PoE = ?
Power = 12V/1A
Color of LEDs = yellow
Size = 173 x 130 x 35 mm
USB = 1x
Serial Port = ?
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?


Wireless Radio = ?
WLAN DSP processor = ?
Antenna Connector Type = External 5 dBi antenna x 1
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.4GHz
 802.11n = up to 150Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of InterestEdit

[ hardware and upgrade guide]




Fixme This section is in need of cleanup!


Fixme This section is in need of cleanup!

JTAG/Serial InfoEdit


JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!


Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

USB InfoEdit

Fixme This section is in need of cleanup!

vlan InfoEdit

Fixme This section is in need of cleanup!


Fixme This section is in need of cleanup!

FCC PicturesEdit

Asus RT-N10U FCCb Asus RT-N10U FCCc

Asus RT-N10U FCCd Asus RT-N10U FCCe Asus RT-N10U FCCf

Asus RT-N10U FCCg Asus RT-N10U FCCh Asus RT-N10U FCCi

Asus RT-N10U FCCj Asus RT-N10U FCCk Asus RT-N10U FCCl

Asus RT-N10U FCCm Asus RT-N10U FCCn Asus RT-N10U FCCo

Asus RT-N10U FCCp Asus RT-N10U FCCq Asus RT-N10U FCCr

Asus RT-N10U FCCs Asus RT-N10U FCCt



Hardware ModificationEdit


Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.