FANDOM


Your here: Home / Network / Hardware Specific / Asus / RT-N66U


Asus RT-N66U
Asus RT-N66U c
Dark Knight Simultaneous Dual-Band Wireless-N Broadband Gaming Router

Homepage

http://www.asus.com

Wikipedia

Asus Routers

WikiDevi

RT-N66U

dd-wrt

WIP

OpenWRT

Not Supported

Tomato

Not Supported

TomatoUSB

Not Supported

Gargoyle

Not Supported

NOTE: The status of Device support is unknown.

Specs

Forklift This section is in need of cleanup!

Platform

Serial Num. = ?
FCC ID = MSQ-RTN66U
CPU Type = Broadcom BCM4706/BCM5300 rev 1 pkg 0?
MIPS Rev = ?
CPU Speed = 600Mhz
Bus = ?
Flash Type = ?
Flash Chip = Serial
Flash Size = 32MB
Max Firmware Size = ?
RAM Size = 256MB
RAM Chip = ?
nvram Size = 32k?
Switch = Broadcom BCM4706 (SoC)
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100/1000-WAN 4-10/100/1000-LAN
Wired Standard = IEEE 802.3/3u/3ab
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = SD Socket
SD/MMC Mod Support = Yes
MiniPCI slots = No
PoE = No
Power = 19VDC/1.58A
Color of LEDs = ?
Size = ?
USB = Yes x2
Serial Port = ?
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = Broadcom BCM4706 (SoC)
WLAN DSP processor = ?
Antenna Connector Type = 3x3 U.FL, RP-SMA
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.4GHz
 802.11n = up to 450Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Radio

Wireless Radio = Broadcom BCM4331
WLAN DSP processor = ?
Antenna Connector Type = 3x3 U.FL, RP-SMA
Wireless Standard = IEEE 802.11a/n
WiFi Operating Frequency = 5GHz
 802.11n = up to 450Mbps
 802.11a = 6, 9, 12, 18, 24, 36, 48, 54Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of Interest

Flashing

Forklift This section is in need of cleanup!

Upgrading

Forklift This section is in need of cleanup!

Reverting

Forklift This section is in need of cleanup!

JTAG/Serial Info

JTAG

JTAG Pinouts
Forklift This section is in need of cleanup!
JTAG Recovery
Forklift This section is in need JTAG Recovery Instructions!

Serial

Serial Pinouts
Forklift This section is in need of cleanup!
Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial Recovery
Forklift This section is in need of Serial Recovery Instructions!

USB Info

Forklift This section is in need of cleanup!

vlan Info

Forklift This section is in need of cleanup!

Pictures

Asus RT-N66U b Asus RT-N66U a Asus RT-N66U d

Asus RT-N66U e Asus RT-N66U f Asus RT-N66U g

FCC Pictures

Fixme This section is in need of cleanup!

Notes

Boot Log?

Jan  1 00:00:06 syslogd started: BusyBox v1.17.4
Jan  1 00:00:06 kernel: klogd started: BusyBox v1.17.4 (2011-09-28 10:51:26 CST)
Jan  1 00:00:06 kernel: Linux version 2.6.22.19 (root@asus) (gcc version 4.2.4) #41 PREEMPT Wed Sep 28 10:58:53 CST 2011
Jan  1 00:00:06 kernel: CPU revision is: 00019749
Jan  1 00:00:06 kernel: Determined physical RAM map:
Jan  1 00:00:06 kernel:  memory: 07fff000 @ 00000000 (usable)
Jan  1 00:00:06 kernel: Zone PFN ranges:
Jan  1 00:00:06 kernel:   Normal          0 ->    32767
Jan  1 00:00:06 kernel:   HighMem     32767 ->    32767
Jan  1 00:00:06 kernel: early_node_map[1] active PFN ranges
Jan  1 00:00:06 kernel:     0:        0 ->    32767
Jan  1 00:00:06 kernel: Built 1 zonelists.  Total pages: 32767
Jan  1 00:00:06 syslog: module ledtrig-usbdev not found in modules.dep
Jan  1 00:00:06 syslog: module leds-usb not found in modules.dep
Jan  1 00:00:06 kernel: Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Jan  1 00:00:06 kernel: Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Jan  1 00:00:06 kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.
Jan  1 00:00:06 kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 00:00:06 kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 00:00:06 kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 00:00:06 kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 00:00:06 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan  1 00:00:06 kernel: CPU: BCM5300 rev 1 pkg 0 at 600 MHz
Jan  1 00:00:06 kernel: Using 300.000 MHz high precision timer.
Jan  1 00:00:06 kernel: console [ttyS0] enabled
Jan  1 00:00:06 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:00:06 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 00:00:06 kernel: Memory: 126136k/131068k available (2556k kernel code, 4784k reserved, 503k data, 128k init, 0k highmem)
Jan  1 00:00:06 kernel: Mount-cache hash table entries: 512
Jan  1 00:00:06 kernel: NET: Registered protocol family 16
Jan  1 00:00:06 kernel: PCI: Initializing host
Jan  1 00:00:06 kernel: PCI: Reset RC
Jan  1 00:00:06 kernel: PCI: Initializing host
Jan  1 00:00:06 kernel: PCI: Reset RC
Jan  1 00:00:06 kernel: PCI: Fixing up bus 0
Jan  1 00:00:06 kernel: PCI/PCIe coreunit 0 is set to bus 1.
Jan  1 00:00:06 kernel: PCI: Fixing up bridge
Jan  1 00:00:06 kernel: PCI: Fixing up bridge
Jan  1 00:00:06 kernel: PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
Jan  1 00:00:06 kernel: PCI: Fixing up bus 1
Jan  1 00:00:06 kernel: PCI/PCIe coreunit 1 is set to bus 2.
Jan  1 00:00:06 kernel: PCI: Fixing up bridge
Jan  1 00:00:06 kernel: PCI: Fixing up bridge
Jan  1 00:00:06 kernel: PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
Jan  1 00:00:06 kernel: PCI: Fixing up bus 2
Jan  1 00:00:06 kernel: NET: Registered protocol family 2
Jan  1 00:00:06 kernel: Time: MIPS clocksource has been installed.
Jan  1 00:00:06 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:06 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 00:00:06 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:06 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 00:00:06 kernel: TCP reno registered
Jan  1 00:00:06 kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan  1 00:00:06 kernel: io scheduler noop registered (default)
Jan  1 00:00:06 kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan  1 00:00:06 kernel: N_HDLC line discipline registered.
Jan  1 00:00:06 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jan  1 00:00:06 kernel: serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
Jan  1 00:00:06 kernel: serial8250: ttyS1 at MMIO 0xb8000400 (irq = 8) is a 16550A
Jan  1 00:00:06 kernel: PPP generic driver version 2.4.2
Jan  1 00:00:06 kernel: MPPE/MPPC encryption/compression module registered
Jan  1 00:00:06 kernel: NET: Registered protocol family 24
Jan  1 00:00:06 kernel: PPPoL2TP kernel driver, V0.18.3
Jan  1 00:00:06 kernel: PPTP driver version 0.8.5
Jan  1 00:00:06 kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 00:00:06 kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:00:06 kernel: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
Jan  1 00:00:06 kernel: number of CFI chips: 1
Jan  1 00:00:06 kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 00:00:06 kernel: Flash device: 0x2000000 at 0x1c000000
Jan  1 00:00:06 kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan  1 00:00:06 kernel: 0x00000000-0x00040000 : "pmon"
Jan  1 00:00:06 kernel: 0x00040000-0x01fe0000 : "linux"
Jan  1 00:00:06 kernel: 0x00140000-0x01320000 : "rootfs"
Jan  1 00:00:06 kernel: 0x01320000-0x01fe0000 : "jffs2"
Jan  1 00:00:06 kernel: 0x01fe0000-0x02000000 : "nvram"
Jan  1 00:00:06 kernel: Found an  serial flash with 0 0KB blocks; total size 0MB
Jan  1 00:00:06 kernel: sflash: found no supported devices
Jan  1 00:00:06 kernel: _nvram_init: allocat header: 2151514112, size= 32768
Jan  1 00:00:06 kernel: sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:06 kernel: sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:06 kernel: u32 classifier
Jan  1 00:00:06 kernel:     OLD policer on 
Jan  1 00:00:06 kernel: Netfilter messages via NETLINK v0.30.
Jan  1 00:00:06 kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
Jan  1 00:00:06 kernel: ipt_time loading
Jan  1 00:00:06 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:06 kernel: net/ipv4/netfilter/tomato_ct.c [Sep 27 2011 18:31:25]
Jan  1 00:00:06 kernel: NET: Registered protocol family 1
Jan  1 00:00:06 kernel: NET: Registered protocol family 10
Jan  1 00:00:06 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:06 kernel: NET: Registered protocol family 17
Jan  1 00:00:06 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan  1 00:00:06 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan  1 00:00:06 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 00:00:06 kernel: Freeing unused kernel memory: 128k freed
Jan  1 00:00:06 kernel: Warning: unable to open an initial console.
Jan  1 00:00:06 kernel: ctf: module license 'Proprietary' taints kernel.
Jan  1 00:00:06 kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.9
Jan  1 00:00:06 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  1 00:00:06 kernel: wl_module_init: passivemode set to 0x0
Jan  1 00:00:06 kernel: PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
Jan  1 00:00:06 kernel: eth1: Broadcom BCM4331 802.11 Wireless Controller 5.100.138.9
Jan  1 00:00:07 kernel: PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
Jan  1 00:00:07 kernel: eth2: Broadcom BCM4331 802.11 Wireless Controller 5.100.138.9
Jan  1 00:00:07 kernel: usbcore: registered new interface driver usbfs
Jan  1 00:00:07 kernel: usbcore: registered new interface driver hub
Jan  1 00:00:07 kernel: usbcore: registered new device driver usb
Jan  1 00:00:07 kernel: SCSI subsystem initialized
Jan  1 00:00:07 kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:07 kernel: usbcore: registered new interface driver usb-storage
Jan  1 00:00:07 kernel: USB Mass Storage support registered.
Jan  1 00:00:07 kernel: ufsd: driver 8.5 (NTFS4LINUX_U85_007_S[2011-06-16-19:30:23]) LBD=ON with ioctl loaded at c0218000
Jan  1 00:00:07 kernel: NTFS read/write support included
Jan  1 00:00:07 kernel: For 'asus_n66u_2011-05-30'
Jan  1 00:00:07 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 00:00:07 kernel: ehci_hcd 0000:00:04.1: EHCI Host Controller
Jan  1 00:00:07 kernel: ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
Jan  1 00:00:07 kernel: ehci_hcd 0000:00:04.1: EHCI Fastpath: New EHCI driver starting
Jan  1 00:00:07 kernel: ehci_hcd 0000:00:04.1: irq 6, io mem 0x18004000
Jan  1 00:00:07 kernel: ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00
Jan  1 00:00:07 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 00:00:07 kernel: hub 1-0:1.0: USB hub found
Jan  1 00:00:07 kernel: hub 1-0:1.0: 2 ports detected
Jan  1 00:00:07 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 00:00:07 kernel: ohci_hcd 0000:00:04.0: OHCI Host Controller
Jan  1 00:00:07 kernel: ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:07 kernel: ohci_hcd 0000:00:04.0: irq 6, io mem 0x18009000
Jan  1 00:00:07 kernel: usb usb2: configuration #1 chosen from 1 choice
Jan  1 00:00:07 kernel: hub 2-0:1.0: USB hub found
Jan  1 00:00:07 kernel: hub 2-0:1.0: 2 ports detected
Jan  1 00:00:07 kernel: usbcore: registered new interface driver usblp
Jan  1 00:00:07 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jan  1 00:00:07 kernel: br0: starting userspace STP failed, starting kernel STP
Jan  1 00:00:07 kernel: vlan1: dev_set_allmulti(master, 1)
Jan  1 00:00:07 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan  1 00:00:07 kernel: vlan1: dev_set_promiscuity(master, 1)
Jan  1 00:00:07 kernel: device eth0 entered promiscuous mode
Jan  1 00:00:07 kernel: device vlan1 entered promiscuous mode
Jan  1 00:00:07 kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 00:00:07 kernel: hub 1-1:1.0: USB hub found
Jan  1 00:00:07 kernel: hub 1-1:1.0: 4 ports detected
Jan  1 00:00:07 kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 3
Jan  1 00:00:07 kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan  1 00:00:07 kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x00F7
Jan  1 00:00:07 kernel: drivers/usb/class/usblp.c: usblp0 Device ID string [85]='MFG:Lexmark;CMD:CPDNPA004;MODEL: 5400 Series;CLASS:Printer;DES:Lexmark 5400 Series;'
Jan  1 00:00:07 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:07 kernel: usb 1-1.2: new high speed USB device using ehci_hcd and address 4
Jan  1 00:00:07 kernel: usb 1-1.2: configuration #1 chosen from 1 choice
Jan  1 00:00:07 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:08 kernel: usb 1-1.4: new high speed USB device using ehci_hcd and address 5
Jan  1 00:00:08 kernel: usb 1-1.4: configuration #1 chosen from 1 choice
Jan  1 00:00:08 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:08 kernel: device eth1 entered promiscuous mode
Jan  1 00:00:09 kernel: scsi 0:0:0:0: Direct-Access     Lexmark  USB Mass Storage  200 PQ: 0 ANSI: 0
Jan  1 00:00:09 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 00:00:09 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 00:00:09 kernel: device eth2 entered promiscuous mode
Jan  1 00:00:09 kernel: br0: topology change detected, propagating
Jan  1 00:00:09 kernel: br0: port 3(eth2) entering forwarding state
Jan  1 00:00:09 kernel: br0: topology change detected, propagating
Jan  1 00:00:09 kernel: br0: port 2(eth1) entering forwarding state
Jan  1 00:00:09 kernel: br0: topology change detected, propagating
Jan  1 00:00:09 kernel: br0: port 1(vlan1) entering forwarding state
Jan  1 00:00:09 WAN Connection: Ethernet link down.
Jan  1 00:00:10 kernel: scsi 1:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
Jan  1 00:00:10 kernel: sd 1:0:0:0: [sdb] 15687678 512-byte hardware sectors (8032 MB)
Jan  1 00:00:10 kernel: sd 1:0:0:0: [sdb] Write Protect is off
Jan  1 00:00:10 kernel: sd 1:0:0:0: [sdb] Assuming drive cache: write through
Jan  1 00:00:10 kernel: sd 1:0:0:0: [sdb] Assuming drive cache: write through
Jan  1 00:00:10 kernel:  sdb:<5>scsi 2:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
Jan  1 00:00:10 kernel: sd 2:0:0:0: [sdc] Attached SCSI removable disk
Jan  1 00:00:10 kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
Jan  1 00:00:10 dnsmasq[529]: started, version 2.55 cachesize 1500
Jan  1 00:00:10 dnsmasq[529]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP TFTP
Jan  1 00:00:10 dnsmasq[529]: asynchronous logging enabled, queue limit is 5 messages
Jan  1 00:00:10 dnsmasq-dhcp[529]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1d
Jan  1 00:00:10 dnsmasq[529]: read /etc/hosts - 4 addresses
Jan  1 00:00:10 RT-N66U: start httpd
Jan  1 00:00:10 syslog: SNet version started
Jan  1 00:00:10 FTP Server: daemon is stoped
Jan  1 00:00:10 miniupnpd[545]: chain VSERVER not found
Jan  1 00:00:10 miniupnpd[545]: HTTP listening on port 42564
Jan  1 00:00:10 miniupnpd[545]: Listening for NAT-PMP traffic on port 5351
Jan  1 00:00:10 miniupnpd[545]: chain VSERVER not found
Jan  1 00:00:10 miniupnpd[545]: chain VSERVER not found
Jan  1 00:00:10 Samba Server: smb daemon is stoped
Jan  1 00:00:10 kernel: gro enabled with interval 2
Jan  1 00:00:10 Samba Server: daemon is started
Jan  1 00:00:11 kernel:  sdb1
Jan  1 00:00:11 kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Jan  1 00:00:11 kernel: sd 1:0:0:0: Attached scsi generic sg2 type 0
Jan  1 00:00:11 dnsmasq-dhcp[529]: DHCPREQUEST(br0) 192.168.1.110 20:cf:30:0f:3e:77 
Jan  1 00:00:11 dnsmasq-dhcp[529]: DHCPACK(br0) 192.168.1.110 20:cf:30:0f:3e:77 Jieming-PC
Jan  1 00:00:13 hotplug[603]: USB /dev/sdb1(ntfs) failed to mount at the first try!
Jan  1 00:00:13 kernel: ufsd: use builtin utf8 instead of kernel utf8
Jan  1 00:00:13 kernel: ufsd: sdb1 without journal
Jan  1 00:00:13 hotplug[603]: USB ntfs fs at /dev/sdb1 mounted on /tmp/mnt/sdb1
Jan  1 00:00:13 FTP Server: daemon is stoped
Jan  1 00:00:13 Samba Server: smb daemon is stoped
Jan  1 00:00:13 Samba Server: daemon is started
Jan  1 00:00:40 nmbd[626]: [2011/01/01 00:00:40, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(392)
Jan  1 00:00:40 nmbd[626]:   Samba name server RT-N66U is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1


Hardware Modz


Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.