Belkin F5D7130 v2115uk
Talk0
1,179pages on
this wiki
this wiki
Your here: Home / Network / Hardware Specific / Belkin / F5D7130 v2115uk
 |
This article is a stub. Please help InfoDepot Wiki by expanding it, adding pictures, and improving existing text.
|
| Belkin F5D7130 v2115uk | |
|---|---|
 | |
|
Homepage | |
|
Wikipedia |
? |
|
dd-wrt |
? |
|
OpenWRT |
Not for 2MB Devices |
|
Tomato |
Not for 2MB Devices |
|
TomatoUSB |
Not for 2MB Devices |
Contents |
NOTE: Requires Micro, Do not flash anything else.
NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.
Specs
Edit
This section is in need of cleanup!
Platform
Serial Num. = ? FCC ID = K7SF5D7130A CPU Type = Broadcom BCM4710 rev 0 MIPS Rev = ? CPU Speed = 125MHz Bus = ? Flash Type = ? Flash Chip = ? Flash Size = 2MB Max Firmware Size = 1769472 bytes RAM Size = 8MB RAM Chip = ? nvram Size = ? Switch = ? Port-based vlan = ? 802.1q vlan = ? Ethernet Port Count = 1-WAN Wired Standard = IEEE 802.3? boot_wait = ? bootloader = ? Flash Card Socket/Type = ? SD/MMC Mod Support = ? MiniPCI slots = No PoE = No Power = 5V/2A Color of LEDs = ? Size = ? USB = No Serial Port = No JTAG Port = 1 Supported by TJTAG/Version = ? Supported by dd-wrt as of = ? dd-wrt K2.4 Support = ? dd-wrt K2.6 Support = ? Special Features = built in bootloader
Radio
Wireless Radio = Broadcom WLAN DSP processor = ? Antenna Connector Type = ? Wireless Standard = IEEE 802.11b/g WiFi Operating Frequency = ? 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11b = 1, 2, 5.5, 11Mbps Radio cor_rev = ? Radio Capabilities = ?
Links of InterestEdit
This section is in need of cleanup!
FlashingEdit
This section is in need of cleanup!
perfect with Tftp flash
micro
UpgradingEdit
This section is in need of cleanup!
RevertingEdit
This section is in need of cleanup!
JTAG/Serial InfoEdit
JTAGEdit
JTAG PinoutsEdit
This section is in need of cleanup!
JTAG RecoveryEdit
This section is in need JTAG Recovery Instructions!
SerialEdit
Serial PinoutsEdit
This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories -
Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
Bits per second = 115200
Data Bits = 8
Parity = none
Stop bits = 1
Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you
don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it Serial line = The COM port your using for serial (ie. COM3) Speed = 115200 Click on Serial under Connection Serial line to connect to = same as above (Serial line) Speed (baud) = 115200 Data bits = 8 Stop bits = 1 Parity = None Flow control = None Click Session Enter a name for your connection under saved sessions Click Save Click Open
Serial RecoveryEdit
This section is in need of Serial Recovery Instructions!
vlan InfoEdit
This section is in need of cleanup!
PicturesEdit
This section is in need of cleanup!
