FANDOM


Your here: Home / Network / Hardware Specific / Belkin / F5D8235-4 v21xx


Belkin F5D8235-4 v21xx
Belkin F5D8235-4 a
N+ Wireless Router

Homepage

F5D8235-4

Wikipedia

?

dd-wrt

Not Supported

OpenWRT

F5D8235-4

Tomato

Not Supported

TomatoUSB

Not Supported

Gargoyle

?

NOTE: This device is not supported by dd-wrt.

SpecsEdit

Fixme This section is in need of cleanup!

Platform

Serial Num. = ?
FCC ID = K7SF5D8235-4B
CPU Type = Ralink RT3052F
MIPS Rev = ?
CPU Speed = 380MHz
Bus = ?
Flash Type = Parallel
Flash Chip = MX S091027 29LV640DBTC-90G 3A368500
Flash Size = 8MB
Max Firmware Size = ?
RAM Size = 32MB
RAM Chip = 2x Winbond W9812G61H-6
nvram Size = ?
Switch = RTL8366SR
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100/1000-WAN 4-10/100/1000-LAN
Wired Standard = IEEE 802.3?
boot_wait = ?
bootloader = U-Boot
Flash Card Socket/Type = No
SD/MMC Mod Support = No
MiniPCI slots = No
PoE = No
Power = 12V/1.5A
Color of LEDs = ?
Size = ?
USB = USB 2.0
Serial Port = 1
JTAG Port = No
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = Ralink RT3052F (SoC)
WLAN DSP processor = ?
Antenna Connector Type = External Fixed
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.4GHz
 802.11n = up to 300Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of InterestEdit

FlashingEdit

Fixme This section is in need of cleanup!

UpgradingEdit

Fixme This section is in need of cleanup!

RevertingEdit

JTAG/Serial InfoEdit

JTAGEdit

JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!

SerialEdit

Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

USB InfoEdit

Fixme This section is in need of cleanup!

vlan InfoEdit

Fixme This section is in need of cleanup!

PicturesEdit

Belkin F5D8235-4 v21xx b Belkin F5D8235-4 v21xx c

FCC PicturesEdit

NotesEdit


Hardware ModificationEdit


Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.