FANDOM


These are my settings for what I do and have worked for alot of people.

2.4Ghz band

First you should have your wireless channel on 1,6, or 11 (I use channel 11, and your security should be either WPA-AES or WPA2-AES, also you should turn your ACK timing = 0. Here are some other settings for the Advanced Wireless settings you can try:

CTS Protection mode= Disabled
Frame Burst= Disabled
Beacon Interval= 100
Preamble= Auto
TX power= 28 to start
Afterburner= Disabled
WMM Support= Disabled
Bluetooth Coexistence= Enabled (I have PS3, u don't have to turn this on)

Now go to Administration Tab and change these settings:

IP Filtering Settings
Max ports=4096
TCP and UDP Timeouts to 90

5Ghz band

I use channel 60 Lower 40Mhz and your security should be WPA2-AES, also you should turn your ACK timing = 0. Here are some other settings for the Advanced Wireless settings you can try:

CTS Protection mode=Enabled (Disable if N-only)
Frame Burst=Disabled
Beacon Interval=100
Preamble=Auto
TX power=42 to start
Afterburner=Disabled
WMM Support=Enabled

Now go to Administration Tab and change these settings:

IP Filtering Settings
Max ports=4096
TCP and UDP Timeouts to 90

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.