FANDOM


Your here: Home / Network / Hardware Specific / Buffalo / WLI-TX4-AG300N


Buffalo WLI-TX4-AG300N
Buffalo WLI-TX4-AG300N a

Homepage

WLI-TX4-AG300N

Wikipedia

?

dd-wrt

?

OpenWRT

?

Tomato

?

TomatoUSB

Not Supported

Gargoyle

?

NOTE: This device is not supported by dd-wrt.

SpecsEdit

Fixme This section is in need of cleanup!

Platform

Serial Num. = ?
FCC ID = FDI-09102074-0
CPU Type = RaLink RT2880F N1S4810G0 1009PT
MIPS Rev = ?
CPU Speed = ?
Bus = ?
Flash Type = ?
Flash Chip = MX T100144 29LV32008T1-70G 3C791400
Flash Size = ?
Max Firmware Size = ?
RAM Size = ?
RAM Chip = ESMT M12L128168A- 6T AZG2P0NY 0942
nvram Size = ?
Switch = ICPLUS IP175C LF 1003C13 FR1R381.18
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 4-10/100-LAN
Wired Standard = IEEE 802.3/3u
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = No
SD/MMC Mod Support = No
MiniPCI slots = No
PoE = No
Power = 12V/1.25A
Color of LEDs = ?
Size = 140 x 39 x 140 mm
USB = No
Serial Port = 1
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = RaLink RT2880F (SoC)
WLAN DSP processor = ?
Antenna Connector Type = ?
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.412 - 2.462GHz
 802.11n Draft 2.0 = up to 300Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Radio

Wireless Radio = RaLink
WLAN DSP processor = ?
Antenna Connector Type = ?
Wireless Standard = IEEE 802.11a/n
WiFi Operating Frequency = 5.150 - 5.825GHz
 802.11n Draft 2.0 = up to 300Mbps
 802.11a = 6, 9, 12, 18, 24, 36, 48, 54Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of InterestEdit

FlashingEdit

Fixme This section is in need of cleanup!

UpgradingEdit

Fixme This section is in need of cleanup!

RevertingEdit

Fixme This section is in need of cleanup!

JTAG/Serial InfoEdit

JTAGEdit

JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!

SerialEdit

Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

USB InfoEdit

Fixme This section is in need of cleanup!

vlan InfoEdit

Fixme This section is in need of cleanup!

PicturesEdit

Buffalo WLI-TX4-AG300N b Buffalo WLI-TX4-AG300N c Buffalo WLI-TX4-AG300N d

FCC PicturesEdit

Buffalo WLI-TX4-AG300N FCC a Buffalo WLI-TX4-AG300N FCC b Buffalo WLI-TX4-AG300N FCC c

Buffalo WLI-TX4-AG300N FCC d Buffalo WLI-TX4-AG300N FCC e Buffalo WLI-TX4-AG300N FCC f

Buffalo WLI-TX4-AG300N FCC g Buffalo WLI-TX4-AG300N FCC h Buffalo WLI-TX4-AG300N FCC i

Buffalo WLI-TX4-AG300N FCC j Buffalo WLI-TX4-AG300N FCC k Buffalo WLI-TX4-AG300N FCC l

Buffalo WLI-TX4-AG300N FCC m

NotesEdit


Hardware ModificationEdit


Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.