Fandom

InfoDepot Wiki

Cisco Valet M10 v2.0

1,124pages on
this wiki
Add New Page
Talk0 Share

Your here: Home / Network / Hardware Specific / Cisco-Linksys / Cisco Valet M10 v2.0


Cisco Valet M10 v2.0
Cisco Valet M10 v1.0a
Wireless HotSpot Router

Homepage

Valet M10

Wikipedia

Cisco Valet Routers

WikiDevi

Cisco Valet M10 v2

dd-wrt

WIP

OpenWRT

Status Unknown

Tomato

Status Unknown

TomatoUSB

Flash from STOCK-Firmware, TOASTMAN or SHIBBY. SEE NOTES BELOW!!!

Gargoyle

Status Unknown

NOTES: To flash from stock firmware, follow the link HERE.  After flashing and doing a 30/30/30, you will then be able to flash a more current build of either TOASTMAN or SHIBBY

SpecsEdit

Fixme This section is in need of cleanup!

Platform

Serial Num. = ?
FCC ID = Q87-M10V2
CPU Type = Broadcom BCM5357
MIPS Rev = ?
CPU Speed = 300MHz
Bus = ?
Flash Type = Serial
Flash Chip = ?
Flash Size = 4MB
Max Firmware Size = ?
RAM Size = 32MB
RAM Chip = ?
nvram Size = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-WAN 4-LAN
Wired Standard = IEEE 802.3?
boot_wait = ?
bootloader = CFE
Flash Card Socket/Type = No
SD/MMC Mod Support = No
MiniPCI slots = No
PoE = No
Power = ?
Color of LEDs = ?
Size = 7.95" x 6.30" x 1.34"
USB = No
Serial Port = Yes
JTAG Port = Yes
Supported by TJTAG 3.02 = ?
Supported by dd-wrt as of = WIP
Special Features = ?

Radio (wl0)

Wireless Radio = Broadcom
WLAN DSP processor = Broadcom
Antenna Connector Type = Internal
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.4 GHz
 802.11n Draft = up to 300Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of InterestEdit

Fixme This section is in need of cleanup!

FlashingEdit

Fixme This section is in need of cleanup!

UpgradingEdit

Fixme This section is in need of cleanup!

RevertingEdit

Fixme This section is in need of cleanup!

JTAG/Serial InfoEdit

JTAGEdit

JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!

SerialEdit

Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

PicturesEdit

Fixme This section is in need of cleanup!





FCC PicturesEdit

With Switch Sample

Cisco Valet (M10) v2.0 FCCa switch Cisco Valet (M10) v2.0 FCCb switch Cisco Valet (M10) v2.0 FCCc switch

Cisco Valet (M10) v2.0 FCCd switch Cisco Valet (M10) v2.0 FCCe switch Cisco Valet (M10) v2.0 FCCf switch

Cisco Valet (M10) v2.0 FCCg switch Cisco Valet (M10) v2.0 FCCh switch Cisco Valet (M10) v2.0 FCCi switch

Cisco Valet (M10) v2.0 FCCj switch Cisco Valet (M10) v2.0 FCCk switch

Without Switch Sample

Cisco Valet (M10) v2.0 FCCa no switch Cisco Valet (M10) v2.0 FCCb no switch Cisco Valet (M10) v2.0 FCCc no switch

Cisco Valet (M10) v2.0 FCCd no switch Cisco Valet (M10) v2.0 FCCe no switch Cisco Valet (M10) v2.0 FCCf no switch

Cisco Valet (M10) v2.0 FCCg no switch Cisco Valet (M10) v2.0 FCCh no switch Cisco Valet (M10) v2.0 FCCi no switch

Cisco Valet (M10) v2.0 FCCj no switch Cisco Valet (M10) v2.0 FCCk no switch

NotesEdit

 

Hardware ModificationEdit

 

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.