FANDOM


Your here: Home / Network / Hardware Specific / Gateworks / Laguna GW2388-4


Gateworks Laguna GW2388-4
Gateworks Laguna GW2388-4 a

Homepage

?

Wikipedia

?

dd-wrt

Laguna GW2388-4

OpenWRT

?

Tomato

?

TomatoUSB

Not Supported

Gargoyle

?

NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.

SpecsEdit

Fixme This section is in need of cleanup!

Platform

Serial Num. = ?
FCC ID = ?
CPU Type = Cavium CNS3420 dual core
MIPS Rev = ?
CPU Speed = 600MHz
Bus = ?
Flash Type = ?
Flash Chip = ?
Flash Size = 16MB
Max Firmware Size = ?
RAM Size = 128MB DDRII SDRAM
RAM Chip = ?
nvram Size = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = Two 10/100/1000 Base-TX
Wired Standard = IEEE 802.3?
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = Micro SD Flash Expansion Socket
SD/MMC Mod Support = ?
MiniPCI slots = Four Type III
PoE = Passive Power Over Ethernet
Power = 8 to 48VDC Input Voltage Range
Color of LEDs = ?
Size = ?
USB = Two v2.0 Host USB Ports
Serial Port = Two RS232 Serial Ports
JTAG Port = ?
Supported by TJTAG/Version = ?
Supported by dd-wrt as of = ?
dd-wrt K2.4 Support = ?
dd-wrt K2.6 Support = ?
Special Features = 
   * uSD Flash Socket
   * General Purpose Digital I/O
   * 1Kbyte Serial EEPROM
   * Battery Powered Real Time Clock
   * Voltage and Temperature Monitor
   * Thermally Activated Fan Controller
   * Watchdog Timer
   * Front Panel LED and Push-button Reset
   * Reverse Voltage and Transient Protection
   * 24W Shared Between Mini-PCI Sockets
   * 4,5W Typical Operating Power
   * -40°C to +85°C Operating Temperature
   * Software Support for Linux
   * 1 Year Warranty
   * Optional GPS, SATA, and RS485 Serial Port
   * Special DD-WRT OS Software Support available
   * The additional available DD-WRT OS special version has the operating
     system already preinstalled and activated.

Links of InterestEdit

OverviewEdit

available on 20th of March 2011

The GW2388-4 is a member of the Gateworks Laguna Network Processor family. The GW2388-4 meets the requirements for enterprise and residential network applications. This network processor consists of a Cavium CNS3420 dual core processor operating at 600MHz, 128Mbytes of DDRII-400 SDRAM, and 16Mbytes of Flash. Peripherals include four Type III Mini-PCI sockets, two Gigabit Ethernet ports, two USB Host ports, and uSD Flash socket. Additional features include digital I/O, serial EEPROM, real time clock with battery backup, system monitor to track operating temperature and input voltage, RS232 serial port for management and debug, and watchdog timer. The GW2388-4 also supports GPS, SATA, and RS485 serial port as ordering options. Power is applied through a dedicated connector or through either Ethernet connector with the unused signal pairs in a passive power over Ethernet architecture. The mechanical dimensions and front panel connector locations are compatible with the GW2348/GW2358. A board support package is included for OpenWRT/Linux 2.6 operating systems.

FlashingEdit

Fixme This section is in need of cleanup!

UpgradingEdit

Fixme This section is in need of cleanup!

RevertingEdit

Fixme This section is in need of cleanup!

JTAG/Serial InfoEdit

JTAGEdit

JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!

SerialEdit

Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

USB InfoEdit

Fixme This section is in need of cleanup!

vlan InfoEdit

Fixme This section is in need of cleanup!

PicturesEdit

Fixme This section is in need of cleanup!

FCC PicturesEdit

Fixme This section is in need of cleanup!

NotesEdit


Hardware ModificationEdit


Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.