Wikia

InfoDepot Wiki

Mikrotik Routerboard RB-532 vA

Talk0
1,177pages on
this wiki

Your here: Home / Network / Hardware Specific / Mikrotik / Routerboard RB-532 vA


Mikrotik Routerboard RB-532 vA
Mikrotik Routerboard RB-532a

Homepage

RB-532

Wikipedia

?

dd-wrt

RB-532

OpenWRT

Mikrotik

Tomato

?

TomatoUSB

Not Supported

Gargoyle

?

NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.

SpecsEdit

Fixme This section is in need of cleanup!

Platform

Serial Num. = ?
FCC ID = ?
CPU Type = MIPS 4Kc
MIPS Rev = ?
CPU Speed = 200-400MHz
Bus = ?
Flash Type = ?
Flash Chip = ?
Flash Size = 32-64MB
Max Firmware Size = ?
RAM Size = 128MB
RAM Chip = ?
nvram Size = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-WAN 2-LAN
Wired Standard = IEEE 802.3?
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = No
MiniPCI slots = 2 (up to 6)
PoE = Yes
Power = 6-22 or 25-56
Color of LEDs = ?
Size = ?
USB = No
Serial Port = Yes
JTAG Port = ?
Supported by TJTAG/Version = ?
Supported by dd-wrt as of = rb532 build (v23 SP3 - build1203)
dd-wrt K2.4 Support = ?
dd-wrt K2.6 Support = ?
Special Features = Hardware watchdog

Radio

Wireless Radio = depends on card

Links of InterestEdit

Fixme This section is in need of cleanup!

FlashingEdit

Fixme This section is in need of cleanup!

UpgradingEdit

Fixme This section is in need of cleanup!

RevertingEdit

Fixme This section is in need of cleanup!

JTAG/Serial InfoEdit

JTAGEdit

JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!

SerialEdit

Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

USB InfoEdit

Fixme This section is in need of cleanup!

vlan InfoEdit

Fixme This section is in need of cleanup!

PicturesEdit

Mikrotik Routerboard RB-532b

FCC PicturesEdit

Fixme This section is in need of cleanup!

NotesEdit


Hardware ModificationEdit


Around Wikia's network

Random Wiki