InfoDepot Wiki

Netgear WNR3500 v2.0 VC

1,124pages on
this wiki
Add New Page
Talk0 Share

Your here: Home / Network / Hardware Specific / Netgear / WNR3500 v2.0 VC

Netgear WNR3500 v2.0 VC
Netgear WNR3500a


Netgear WNR3500










Not Supported



NOTE: Requires K2.6, Do not flash anything else.
NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.


Fixme This section is in need of cleanup!


Serial Num. = ?
FCC ID = PY308400093
CPU Type = Broadcom BCM4718A1KFBG CS0841 P11 E8937 6 N1 (BCM4718A SoC)
MIPS Rev = ?
CPU Speed = 480MHz
Bus = ?
Flash Type = Serial
Flash Chip = MX X084231 25L6405DMI-12G 2Y169103 (Macronix MX25L6405D)
Flash Size = 8MB
Max Firmware Size = ?
RAM Size = 64MB
RAM Chip = Samsung 834 K4T56163QI-ZCE6 CQE021Q3
nvram Size = ?
Switch = Broadcom BCM53115SKFBG TSO841 P21 896189 N1 (BCM53115)
Port-based vlan = Yes
802.1q vlan = ?
Ethernet Port Count = 1-10/100/1000-WAN 4-10/100/1000-LAN
Wired Standard = IEEE 802.3?
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = No
SD/MMC Mod Support = No
MiniPCI slots = No
PoE = No
Power = 12V/1A
Color of LEDs = ?
Size = ?
USB = No
Serial Port = Yes
JTAG Port = Yes
Supported by TJTAG/Version = Yes/3.02
Supported by dd-wrt as of = v24 sp2 - build 12966 - 20090923
dd-wrt K2.4 Support = No
dd-wrt K2.6 Support = Yes
Special Features = USB, 1000 BaseT (gigabit) switch

Radio (wl0)

Wireless Radio = Broadcom (BCM4718A SoC)
WLAN DSP processor = ?
Antenna Connector Type = Internal Antenna
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.4GHz
 802.11n Draft 2.0 = up to 300Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of InterestEdit

Fixme This section is in need of cleanup!


Fixme This section is in need of cleanup!


Fixme This section is in need of cleanup!


Fixme This section is in need of cleanup!

JTAG/Serial InfoEdit


JTAG PinoutsEdit
Fixme This section is in need of cleanup!
JTAG RecoveryEdit
Fixme This section is in need JTAG Recovery Instructions!


Serial PinoutsEdit
Fixme This section is in need of cleanup!
Hyper terminal Setup in Windows XPEdit
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XPEdit
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial RecoveryEdit
Fixme This section is in need of Serial Recovery Instructions!

vlan InfoEdit

Fixme This section is in need of cleanup!


Netgear WNR3500b

FCC PicturesEdit


Hardware ModificationEdit

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.