FCC ID = U2M-UB9700803
Radio Chip = Ralink RT3070L PB25860E0 0830ST
Wireless Data Rates
Up to 150Mbps
WPA/WPA2 (AES, 64,128-WEP with shared-key authentication)
WPS PIN, PBC (Hardware WiFi Protected Setup Button)
2.4GHz - 2.484GHz
11 Channels (US, Canada) 13 Channels (Europe)
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
>= 16dBm @1~11Mbps
>= 16 dBm @6Mbps
>= 12 dBm @54Mbps
Windows 2000, XP, Vista 32 and 64 bit/ MAC 10.3/ 10.4/ 10.5/ 10.6
0°C - 45°C (32°F - 113°F)
15% - 95%, Non-Condensing
Supports 802.11b/g/n 1T1R architecture with fully forward compatible with IEEE802.11n draft 4.0 and IEEE 802.11b/g standard.
NOTICE: RNX-EasyN1 doesn't support Linux now.
The easiest way to upgrade your system into wireless N network.
Connect your PC/NB to a wireless network in minutes using high speed USB2.0 interface.
802.11b/g/n 4.0 provide further coverage, less dead spot and higher throughput.
Easy setup with Wi-Fi Protected Setup (WPS).
Security support WPA/WPA2 (AES, 64,128-WEP with shared-key authentication).
Wireless Multimedia Enhancements Quality of Service support (QoS) / enhanced power saving for Dynamic Networking
RNX-EasyN1 is also fully compatible with IEEE 802.11b/g standard.
Compatible with Windows 2000, XP, Vista 32 and 64 bit/ MAC 10.3/ 10.4/ 10.5/ 10.6
Advanced power management for Low power consumption
Links of Interest
This section is in need of cleanup!
Upgrade almost any computer to a wireless N network with this simple device.
The Rosewill RNX-EasyN1 adapter connects via USB to your computer, turning it into a wireless 802.11n compliant device. The adapter features a frequency band of 2.4GHz - 2.484GHz for less dead spots and less interference with other devices. For your convenience, security comes standard with a Wi-Fi Protected Setup as well as shared-key authentication. The adapter also features advanced power management for lower power consumption.